The Heat Platen is the "heart" parts for a heat press machine. The main problem is:
1.Easy bent when heating up at high temperature;
2.Heating is no even
3.Platen is not flat
It will be headach when a customer have those problems.AIDARY had the priviledge to have been able to sell many many models and brands of Heat Presses.
There are look alike for most of companies AIDARY provide high quality heating platen.
These heating rods are comparable to those found in industrial ovens
that heat up quickly, work efficiently and last many many years.
Some manufacturers use "Toaster Type " winding heat elements.
These can have cold spots that occur in each bend of the metal or they are just too thin to properly heat up the casting.
Look in your Toaster and see where the element does not heat at the bends. Other Manufaturers attempt to use two different heat elements. These must be exactly matched for electrical resistance or they will heat differently, causing one side of the casting to be hotter or colder than the other. Some even have crossing points where hot spots can occur.
Spare Parts for our heat press machine,when you need some spare parts for your machine, pls let us know the parts is for which model so that we can send you the correct one,
Specification
Products Name: Flat Heating Plate for Heat Press Machine
Model No: HPB
There are several size:
12*12cm
15*20cm
20*23cm
28*38cm
38*38cm
40*50cm
40*60cm
60*80cm
75*105cm
80*100cm
100*120cm
100*150cm
150*200cm
Customized size please contact with our service: info@heatpresscn.com
The Heat Platen is the "heart" parts for a heat press machine. The main problem is:
1.Easy bent when heating up at high temperature;
2.Heating is no even
3.Platen is not flat
It will be headach when a customer have those problems.AIDARY had the priviledge to have been able to sell many many models and brands of Heat Presses.
There are look alike for most of companies AIDARY provide high quality heating platen.
These heating rods are comparable to those found in industrial ovens
that heat up quickly, work efficiently and last many many years.
Some manufacturers use "Toaster Type " winding heat elements.
These can have cold spots that occur in each bend of the metal or they are just too thin to properly heat up the casting.
Look in your Toaster and see where the element does not heat at the bends. Other Manufaturers attempt to use two different heat elements. These must be exactly matched for electrical resistance or they will heat differently, causing one side of the casting to be hotter or colder than the other. Some even have crossing points where hot spots can occur.
Spare Parts for our heat press machine,when you need some spare parts for your machine, pls let us know the parts is for which model so that we can send you the correct one,
Specification
Products Name: Flat Heating Plate for Heat Press Machine
Model No: HPB
There are several size:
12*12cm
15*20cm
20*23cm
28*38cm
38*38cm
40*50cm
40*60cm
60*80cm
75*105cm
80*100cm
100*120cm
100*150cm
150*200cm
Customized size please contact with our service: info@heatpresscn.com
