   (+86)-15659131976   
Hot Keywords:
Sign In        Register
English
Sign In        Register
Home / FAQ / About Sublimation blanks

FAQ Category

About Sublimation blanks

  • How to use sublimation coating

    Usage of Sublimation Coating
     
    Introduction:
    You could spray directly, scrub, immerse or pour the coating on the surface of products, wait unit the coating to be dry(no longer flowing).Then put products in 200°C oven to heat about 20 minutes.(If 180°C for 30minutes).
    1KG coating could spray 8 square meter products(about 300pcs sublimation mug)
    It could be used on wood, metal, stone .glass ,ect, which could bear 200°C high temp with 20minutes.
     
    Solution
    If you find the product’s surface become yellow, just because the heating time is too long or temp is too high. If the paper stick on the surface when you transfer, then the heating time should be shorter.
     
    Usage
    1. You must clean the surface of products first.
    2. Then turn on the oven to heat up ceramic materials (such as mugs or plates) to 30-40degree.don’t be too hot. And then take out ceramic materials . this step is just for avoiding dust on mugs or plates before coating . (metal & glass &wood material doesn’t need this step.)
    3. Then spray or pour coating on the products, when the coating spray evenly on the product’s surface, then take out and wait for drying. When there have no coating flowing off, then put them into oven to heat about 200°C oven, 20 minutes.
    4. When reaching the time, take out the products. That is ready for coating step.

Home

Home | About Us | Products | Customized Service | Video List | Download | FAQ | News | Contact Us

 Copyrights 2022 FUJIAN AIDARY GIFTS CO .,LTD All rights reserved.     Sitemap